Greenhouses, irrigation systems and farm structures are assembled from light-gauge galvanized steel tubing — roof arches, columns, purlins, irrigation pipes, fence posts and equipment frames. Reducing the tube ends allows these parts to be pushed together and pinned or screwed in the field, with no welding required on site.
Where It Is Used
Reducing greenhouse arch and column tube ends for socket joints, swaging irrigation and sprinkler pipe ends, reducing fence post tops for caps and connectors, forming tube ends for poultry and livestock equipment frames, and preparing galvanized tubes for hand-tight field assembly.
Why Tube Reducing Matters
Greenhouse builders and farm installers work outdoors, often far from power and welding equipment. A well-reduced tube end slides smoothly into the next tube and locks with a single bolt or pin, cutting assembly time dramatically. Consistent reduction also keeps joints tight for years of wind, snow load and daily thermal movement.
Built for Your Production Line
Our machines are widely used by greenhouse manufacturers and tube processors for light-gauge galvanized tube, with dies for the common 22 mm to 60 mm range. High output per shift and low die cost make it economical to process the large tube volumes that agricultural projects require.